MeshPhysical

Creates a Mesh Physical Material

Description

This material needs lights to be visible.

Parameters

Name	Type	Description
color	color	material color
useVertexColors	boolean	defines if the color attribute on the geometry is used
transparent	boolean	sets the material to transparent
opacity	float	sets the material opacity
alphaTest	float	sets the min alpha below which the material is invisible
useMap	boolean	toggle on to use a map affecting color
map	node_path	texture map affecting color
useAlphaMap	boolean	toggle if you want to use an alpha map
alphaMap	node_path	specify the alpha map COP node
useAOMap	boolean	toggle if you want to use an ambient occlusion map
aoMap	node_path	specify the AO map COP node
aoMapIntensity	float	ambient occlusion intensity
useBumpMap	boolean	toggle if you want to use a bump map
bumpMap	node_path	specify the bump map COP node
bumpScale	float	bump scale
bumpBias	float	bump bias
useDisplacementMap	boolean	toggle if you want to use a displacement map
displacementMap	node_path	specify the displacement map COP node
displacementScale	float	displacement scale
displacementBias	float	displacement bias
emissive	color	emissive color
useEmissiveMap	boolean	toggle if you want to use a emissive map
emissiveMap	node_path	specify the emissive map COP node
emissiveIntensity	float	emissive intensity
useEnvMap	boolean	toggle if you want to use an environment map
envMap	node_path	specify the environment map COP node
envMapIntensity	float	environment intensity
useLightMap	boolean	toggle if you want to use a light map
lightMap	node_path	specify the light map COP node
lightMapIntensity	float	light. When set to 0, reflections from environment maps will be very sharp, or blurred when 1. Any value between 0 and 1 can help modulate this.
useNormalMap	boolean	toggle if you want to use a normal map
normalMap	node_path	specify the normal map COP node
normalMapType	integer	type of normal map being used
normalScale	vector2	How much the normal map affects the material. Typical ranges are 0-1
normalScaleMult	float	Normal Map Scale Multiplier, which multiples normalScale
useMetalnessMap	boolean	toggle if you want to use a metalness map
metalnessMap	node_path	specify the metalness map COP node
metalness	float	metalness. It's recommended to either set this value to 0 or to 1, as objects are either metallic or not. Any value in between tends to look like an alien plastic
useRoughnessMap	boolean	toggle if you want to use a roughness map
roughnessMap	node_path	specify the roughness map COP node
roughness	float	roughness. When set to 0, reflections from environment maps will be very sharp, or blurred when 1. Any value between 0 and 1 can help modulate this.
clearcoat	float	Represents the thickness of the clear coat layer, from 0.0 to 1.0
useClearCoatMap	boolean	toggle if you want to use a roughness map
clearcoatMap	node_path	specify the roughness map COP node
useClearCoatNormalMap	boolean	toggle if you want to use a clear coat normal map
clearcoatNormalMap	node_path	specify the roughness map COP node
clearcoatNormalScale	vector2	How much the normal map affects the material. Typical ranges are 0-1
clearcoatRoughness	float	clearcoatRoughness
useClearCoatRoughnessMap	boolean	toggle if you want to use a clear cloat map
clearcoatRoughnessMap	node_path	specify the roughness map COP node
useSheen	boolean	toggle if you want to use sheen
sheen	float	The intensity of the sheen layer, from 0.0 to 1.0. Default is 0.0.
sheenRoughness	float	If a color is assigned to this property, the material will use a special sheen BRDF intended for rendering cloth materials such as velvet. The sheen color provides the ability to create two-tone specular materials. null by default
sheenColor	color	If a color is assigned to this property, the material will use a special sheen BRDF intended for rendering cloth materials such as velvet. The sheen color provides the ability to create two-tone specular materials. null by default
transmission	float	Degree of transmission (or optical transparency), from 0.0 to 1.0. Default is 0.0. Thin, transparent or semitransparent, plastic or glass materials remain largely reflective even if they are fully transmissive. The transmission property can be used to model these materials. When transmission is non-zero, opacity should be set to 1.
useTransmissionMap	boolean	toggle if you want to use a transmission map
transmissionMap	node_path	specify the roughness map COP node
ior	float	Index-of-refraction for non-metallic materials
thickness	float	thickness
useThicknessMap	boolean	toggle if you want to use a thickness map
thicknessMap	node_path	specify the roughness map COP node
attenuationDistance	float	attenuation distance
attenuationColor	color	attenuation color
doubleSided	boolean	defines if the material is double sided or not
front	boolean	if the material is not double sided, it can be front sided, or back sided
overrideShadowSide	boolean	override the default shadowSide behavior
shadowDoubleSided	boolean	defines which side(s) are used when rendering shadows
shadowFront	boolean	if the material is not double sided, it can be front sided, or back sided, when computing shadows
colorWrite	boolean	defines if the objects using this material will be rendered in the color buffer. Setting it to false can have those objects occlude the ones behind
depthWrite	boolean	defines if the objects using this material will be rendered in the depth buffer. This can often help transparent objects
depthTest	boolean	toggle depth test
premultipliedAlpha	boolean	premultipliedAlpha
blending	integer	blending
dithering	boolean	dithering, which can be useful when using postprocessing and banding appears on some objects
polygonOffset	boolean	activate polygon offset
wireframe	boolean	toggle on to set material to wireframe
wireframeLinewidth	float	wireframe line width
wireframeLinecap	integer	define appearance of line ends
wireframeLinejoin	integer	Define appearance of line joints
useFog	boolean	toggle on if you have a fog in the scene and the material should be affected by it